V(WQ)model submersible sewage pump

V(WQ)model submersible sewage pumpCONDITION OF USAGE 1.The maximum deep it is allowed in water is 5 m from its center of impeller; 2.The trans mediums temperature shouldnt be higher than 40; 3.Trans mediums PH:410; 4.Kinematics viscosity of the trans mediumis:710-723×10-6 m2/s 5.Density of the trans medium Limit:1.2×103 kg/m3.FUNCTION AND FEATURE This advanced V(WQ) series,a branch of single-phase drainage pumps,will be your ideal drainage helper.The letter V which substitutes for the letters WQ indicates the distinct design of the filter and the broadness of the high efficient area.It can work safely and efficiently at high flux with the feature of complete heads.The design of V750F is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 25 mm.The selection of bottom suction structure,stainless steel and special iron make the pump have the capabilities of complete drain and high resistance of abrasion and corrosion. Submersible pump with cutter is an ideal machine for draining sewage.A high-speed rotating cutter is assembled at the inlet hole of the pump,make it easy to cut off long-fibre and firm sundries contained in the sewage,so as so avoid the impeller is blocked by the entanglement.It is suitable for draining sewage in sanitation,factory,mine and family. The float switch can automatically control on and off with the change of the liquid level.The protector in the motor can automatically cut off the power when it is overheated or overcurrented ,thus guarantee the security and reliability of pumps run even in the atrocious environment. Model PowerOutlet diameter(mm)Voltage(V/Hz)Max.flow(l/min)Max.head(m)Max diameter of (mm)G.W.(kg)Dimensions(cm)KwHpV750F0.751.050220/50 60110/60300122519.526.0×19.5×54.0